Basic Operation Guide for Sauna

The Harvia sauna provides an easy and efficient way to enjoy a relaxing sauna experience. Here’s a quick guide on how to get started:

1. Powering On:
   Locate the control panel (often found on the wall outside or just inside the sauna). Press the Power button to turn the sauna heater on.

2. Setting the Temperature:
   Use the temperature control on the panel to set your desired sauna temperature. Recommended settings are between 70-90°C (158-194°F), but you may adjust this based on personal comfort.

3. Adjusting the Timer:
   Set the timer to your desired session length, typically between 15-30 minutes. The heater will automatically turn off after this period to prevent overheating.

4. Adding Humidity (Optional):
   To add steam, pour a small amount of water over the sauna stones using the provided ladle. Be cautious, as the steam will be very hot. Avoid pouring excessive water to prevent damaging the heater.

5. Powering Off:
   After your session, turn off the sauna using the Power button. Let the sauna cool down with the door slightly open to air it out for the next user.

6. Safety Precautions:

• Always monitor the temperature and timer to avoid overheating.

• Stay hydrated before, during, and after your sauna session.

• Avoid using oils or other additives in the water, as these can damage the heater and create unsafe conditions.

For more detailed guidance, please refer to the Harvia Sauna User Manual or the official Harvia website.

Enjoy your relaxing sauna experience, and remember to follow all safety instructions for a comfortable and safe session!